Driver fatigue monitor with signal output 45km/h start-up speed
Description
Fleets Use Technology to Identify Driver Fatigue, Distraction Levels
Driving a truck is not easy, and for many drivers, distraction and fatigue is just part of the job. But new video and analytics technology can not only pinpoint the signs of driver fatigue and distraction, but also help fleets customize training to prevent these dangerous behaviors.
Fatigue Detection Technology
Fatigue monitoring systems are designed to decrease accidents through the use of wearable technology, smartphone-based tests, and dash camera systems. These technologies not only identify and sideline drivers who show significant signs of fatigue, but could lead to more personalized hours-of-service regulations for all truckers.
I/O and RS232 output optional:
I/O output is only a high/low voltage output, you can get only the alarm signal,the connection is easy. The default setting is high resistance status under normal status, low voltage output when triggered.
RS232 output has alarm signal and picture output, thus you can get the driver's face picture in the center, it need to integrate to the GPS system via protocol.
Attention:
Non-authorized person, please do not open or repair the device.
Please do not operate the system when driving to avoid dangerous
Please handle carefully, do not drop or impact with hard objectives
Do not use chemicals or cleaning agents to clean the machine, it will damage the machine surfaces or rust the paint.
keep it away from water or moist place, device will be rusted or shortcut in those area.
Do not rip, bend or squeezed the wiring by heavy object, or it will be hot to fire.
Power input and output
| Input |
9-36V |
| power consumption |
100mA in 12V car, and 60mA in 24V car |
| I/O output |
high resistance status under normal status, low voltage output when triggered |
| Working Temprature: |
0-80℃ |
| Working Humility: |
10%-90% |
| Weigh: |
108g |
| Demension: |
4.5*10.2cm |
1. Input: 9-36V, LS803 is suitable for both 12V and 24V vehicle, and have good high voltage protection.
2. very lower power consumption, average current less then 100mA in 12V car, and 60mA in 24V car, similar with leakage from the battery, almost does not consume battery power.
3. I/O output, high resistance status under normal status, low voltage output when triggered.
4. Working Temprature: 0-80℃
5. Working Humility: 10%-90%
6. Weigh:108g
7. Demension: 4.5*10.2cm
Product Tags:
|
|
Vechicles Driver Fatigue Warning System / Driver Fatigue Sensor Fast Reflect Images
|
